Thursday, January 5, 2012

Pandaboard ES Android

I tried Android 4.0.1 prebuilt images from Linaro and it works. However WiFi still not working.

Build: https://android-build.linaro.org/builds/~linaro-android/panda-11.12-release/#build=1

Install instructions:

# Get artifacts
wget http://releases.linaro.org/11.11/android/images-ics-preview/mainline-panda/boot.tar.bz2 http://releases.linaro.org/11.11/android/images-ics-preview/mainline-panda/system.tar.bz2 http://releases.linaro.org/11.11/android/images-ics-preview/mainline-panda/userdata.tar.bz2

# Get the latest linaro image tools
bzr branch lp:linaro-image-tools

# Insert SD card and note the assigned '/dev/sdX' or '/dev/mmcblk0'
dmesg

# Create media
sudo ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdX --dev panda --system system.tar.bz2 --boot boot.tar.bz2 --userdata userdata.tar.bz2

For more information on how to use this builds please see the Linaro wiki at:

https://wiki.linaro.org/Platform/Android/ImageInstallation



http://releases.linaro.org/11.11/android/images-ics-preview/mainline-panda/
Posted by at
Labels: ,

1 comment:

  1. JasonMarch 16, 2012 at 2:55 PM

    Hi,
    First of all, thank you for sharing your information here.
    And I understand 4.0.1 linaro image was working in your case.
    I downloaded landing-panda.img from /linaro/11.12.

    It showed ANDROID sign when I turn on the Pandaboard and "Unfortunately, UI has stopped."
    And it seemed it doesn't work for me.

    Did you use the same image which is landing-panda.img.gz from linaro-11.12?

    Jason

    ReplyDelete

Subscribe to: Post Comments (Atom)